‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎ ‎

‎ ‎ ‎ ‎ ‎ ‎ ‎‎ ‎ ‎

Floriani Power Mesh Cutaway Stabilizer - White

Floriani Power Mesh Cutaway Stabilizer - White - Meissner Sewing and Vacuum

FREE DELIVERY OR IN STORE PICK UP

HASSLE FREE RETURNS

LOW PRICE GUARANTEE

Have a question? Chat with a specialist

Floriani Power Mesh Cutaway Stabilizer - White

Stabilizer

~~$46.99~~$32.99

Floriani Power Mesh Cutaway Stabilizer is a sheer, soft, cutaway nylon stabilizer. Use this powerful yet sheer cutaway when embroidering on light-colored knits or stretch fabrics to prevent the “show-through” of the stabilizer. Floriani Power Mesh is very soft, making it ideal for children’s clothing, golf shirts, or light T-shirts. Use in conjunction with our RNK Heat Craft Tool to create free-standing embroideries, patches,

Floriani Power Mesh Cutaway Stabilizer is a sheer, soft, cutaway nylon stabilizer. Use this powerful yet sheer cutaway when embroidering on light-colored knits or stretch fabrics to prevent the “show-through” of the stabilizer. Floriani Power Mesh is very soft, making it ideal for children’s clothing, golf shirts, or light T-shirts. Use in conjunction with our RNK Heat Craft Tool to create free-standing embroideries, patches, emblems, and appliques. Use as the foundation for “in the hoop” block building, zippered bags, quilting, and more!

Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4″ x 4″).
Use the fusible version to cover up scratchy stitches on the back of the embroidery.
Will not shadow through on light weight cottons and knits.

To use Floriani No show Nylon Mesh Fusible:

Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
Fuse the entire piece of the stabilizer on to the back of the garment using a low temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the mesh, not the stabilizer.
Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.
Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),”float” one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.
*Tip! If embroidering knit, don’t forget to use topping!
*Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

Size: 15" x 10 yards

15" x 10 yards
20" x 10 yards

Add to Wishlist

FREE DELIVERY OR IN STORE PICK UP

HASSLE FREE RETURNS

LOW PRICE GUARANTEE

Have a question? Chat with a specialist

Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4″ x 4″).
Use the fusible version to cover up scratchy stitches on the back of the embroidery.
Will not shadow through on light weight cottons and knits.

To use Floriani No show Nylon Mesh Fusible:

Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
Fuse the entire piece of the stabilizer on to the back of the garment using a low temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the mesh, not the stabilizer.
Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.
Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),”float” one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.
*Tip! If embroidering knit, don’t forget to use topping!
*Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

Fly In Program

You live too far away? We'd love to treat you to a plane ticket or Uber ride to pick up your dream machine and receive a FREE in-person lesson to ensure you're fully confident with your new machine before you head home! Apply now!